塑胶原料供应商-东莞远翔

Ultramid? 8253 HS | PA6 | BASF

 二维码 8
Ultramid? 8253 HS | PA6 | BASF
材料文字说明
This resin is a heat stabilized, impact modified type 6 graft copolymer developed for both injection molding and extrusion applications requiring improved dry as molded toughness and increased flexibility. It is also available in non-heat stabilized (Ultramid? 8253) and/or pigmented versions.

Ultramid? 8253 HS is generally recommended for applications such as plugs, receptacles, flexible connector covers, weed trimmer components, clips, fasteners, flanges, key housings as well as many flexible tubing applications.
机械性能干 / 已调节单位测试标准
拉伸模量2300 / 730MPaISO 527-1/-2
屈服应力60 / 32MPaISO 527-1/-2
屈服伸长率4 / 15%ISO 527-1/-2
断裂标称应变40 / >50%ISO 527-1/-2
无缺口简支梁冲击强度, +23°CN / -kJ/m2ISO 179/1eU
简支梁缺口冲击强度, +23°C18 / -kJ/m2ISO 179/1eA
简支梁缺口冲击强度, -30°C5 / -kJ/m2ISO 179/1eA
热性能干 / 已调节单位测试标准
熔融温度, 10°C/min220 / *°CISO 11357-1/-3
热变形温度, 1.80 MPa55 / *°CISO 75-1/-2
线膨胀系数, 平行88 / *E-6/KISO 11359-1/-2
线膨胀系数, 垂直93 / *E-6/KISO 11359-1/-2
厚度为h时的燃烧性HB / *classIEC 60695-11-10
测试用试样的厚度0.8 / *mmIEC 60695-11-10
Yellow Card 现存Yes / *--
电性能干 / 已调节单位测试标准
体积电阻率>1E13 / -Ohm*mIEC 62631-3-1
相对漏电起痕指数- / 600-IEC 60112
其它性能干 / 已调节单位测试标准
吸水性8.1 / *%类似ISO 62
吸湿性2.3 / *%类似ISO 62
密度1090 / *kg/m3ISO 1183
试样制备条件价值单位测试标准
注塑, 熔体温度280°CISO 294
注塑, 模具温度70°CISO 294
函数
www.campusplastics.com1E11E21E31E41E11E21E3粘度-剪切速度Ultramid? 8253 HS剪切速度 in 1/s粘度 in Pa s250°C260°C270°C
www.campusplastics.com1E11E21E31E41E41E51E6剪切应力-剪切速度Ultramid? 8253 HS剪切速度 in 1/s剪切应力 in Pa250°C260°C270°C
www.campusplastics.com-500501001502002501E11E21E31E41E-11E01E11E21E-31E-21E-11E0动态剪切模量-温度Ultramid? 8253 HS (干)温度 in °C剪切模量 in MPatan d inG" in MPa
www.campusplastics.com0123456020406080100应力-应变.Ultramid? 8253 HS (干)应变 in %应力 in MPa-40°C23°C80°C120°C150°CB折断Y变形YB
www.campusplastics.com0123456020406080100应力-应变.Ultramid? 8253 HS (湿)应变 in %应力 in MPa-40°C23°C80°C100°C120°C150°C
www.campusplastics.com012345601000200030004000正割模量-应变.Ultramid? 8253 HS (干)应变 in %正割模量 in MPa-40°C23°C80°C120°C150°CB折断Y变形YB
www.campusplastics.com012345601000200030004000正割模量-应变.Ultramid? 8253 HS (湿)应变 in %正割模量 in MPa-40°C23°C80°C100°C120°C150°C
典型数据
加工方法
注塑
供货形式
粒料
特殊性能
经热稳处理的/耐热的


会员登录
登录
我的资料
我的收藏
留言
回到顶部
http://www.cnhhlp.com http://www.syshenger.com http://www.karlonlife.com http://www.fcgb1881.com http://www.hechengdong.com http://www.carbonconversiontechnology.com http://www.jinanyinshua.com http://www.fordofswanzey.com http://www.htlwc.com http://www.tldpj.com http://www.microfibril.com http://www.6061lg.com http://www.adamakademi.com http://www.townandcountrymover.com http://www.lanxibaowine.com http://www.dramafreemadrid.com http://www.70s-music.com http://www.americantropicsfurniture.com http://www.suxingjia.com http://www.dyjxpjc.com http://www.fcgb1881.com http://www.alba-b.com http://www.tljkxs.com http://www.lawyer006.com http://www.glglxx.com http://www.lanxibaowine.com http://www.pxm168.com http://www.chinablade88.com http://www.ljsec.com http://www.isd03.com